Kinor 16CX-2M Arri PL Super16 Ultra16 Cine Kamera XLR Power 16OPF Zoomobjektiv

- Arri PL mount attached to the housing and lens.

- Super16 or Ultra16 converted.

- 28EPSS motor is converted to an XLR 3-pin connection.

Variations:

1. Camera body. 30m magazine.

2. Camera body. 28EPSS motor. 30m magazine.

3. Camera body. 28EPSS motor. 16OPF zoom lens. 30m magazine.

4. 16OPF Zoom lens. PL mount.

5. Kinor 120m magazine.   

General information:

Kinor-16 - real professional cinema camera with one transport pin, one registration pin, side film clamping.

Electrical motor of Kinor can be upgrade to crystal sync speed, multi speed, single frame, with digital film counter, remote control, variable speed.
Film - 16 mm color or B&W cine film with perforation from one or two sides. 
Position of image on film : as of Russian industrial standard GOST 17706-78.
Claw mechanism - one side, one transport pin, one side, one registration pin.
The position image on film echelon of accuracy +/- 0.01 mm.
Shutter disk - one blade 170 degree opened.
Film magazine - 30 m ( 100 ft ) and 120 m ( 400 ft)daylight attached film magazines.
Speed: 25 fps, 8-32 fps.
Motors: 10EP-16 APK crystal sync speed, 25 fps,
29EPSS analog speed stabilization, 25 fps.
Lenses - prime lenses 6 ...300 mm

Zoom lenses
12-120 mm 16 OPF-1-2M ,
10-100 mm ( 12-120 mm with 0.75 front wide angle attachment )
10-100 mm 16 OPF-12-1
7,5-75 mm ( 10-100 mm with 0,75 front wide angle attachment ),
Viewfinder - reflex 9,5x
Noise - 42 Db
The maximum time of one take shooting - 10 minutes .
Size of camera with 29EPSS motor, 30 m film magazine and 10 mm lens 290x220x220mm
Weight, of camera with 29EPSS motor, 30 m film magazine and 10 mm lens - 4,7 kg
Work temperature of air - from -25C up to + 40C.

29EPSS electrical motor of Kinor-16 camera have analog system of speed control. Speed - 1500 revo, 25 fps, +/- 2,0%
Output torque - 200-1000 gramme-centimetre,
Power source - Battery 12 v (+2,4/-1,2v)
Maximum current with torque 500 g-cm --4,5A
Noise - 35 Db,
Signal of control of start-stop bulb near film gate 8-12 v,
Output Start pulse - 8-12v,
Output Pilot tone signal 1.5v on 150ohm.
Size 252 x 102x145 mm
Weight 2,5 kg

--

See our other items to save shipping costs. 

Usual shipping time (with tracking) to EU 9-25 days, USA and Canada 12-35 days, other world 15-45 days. 

This is a used item and may have traces of usage.  Purchasing old/vintage/used equipment please make sure it is compatible with your new cameras, lenses etc. you are going to use it with. 
Import duties, taxes and charges are not included in the item price or shipping cost.

All information in the listing are not binding and without guarantee. Errors, misprints and prior sale expressly reserved.

Return Policy 

If you are not satisfied for any reason with any item you have purchased, you can return it within 14 days after receiving it. 
Please, make sure the item is packed and shipped it in the same condition you have received it. 
Full refund will be issued after I receive the item back. Buyers have to pay for the return shipping, except for receiving wrong or defective items. In those cases I will cover your shipping expenses (applied only for economy international shipping services).